Print

Engine

Engine


Display per page
Sort by
1 - 30 of 38 results
Product no.: M12COO20

Large Water Pump Belt, fitted to Noble M12 models that have a tensioner. Size 695mm x 10mm

£25.30 *

Currently unavailable

Product no.: M12TUR20

Heatshield fitted to the front Turbo on the Noble M12 and M400 models.

£49.40 *

In stock

Product no.: M12EXH38

O Ring-Inlet Manifold M12 3.0 litre engine as fitted to M12 GTO-3 and M12 GTO-3R, M400. Six required per engine.

£11.15 *

Currently unavailable

Product no.: M12ELE10

Temperature Gauge as fitted to the Noble M12 2.5, M12 GTO-3, M12 GTO-3R and M400

£64.99 *

Currently unavailable

Product no.: M12ENG27/SWLC

Alloy oil separator /breather with removable top. This enables cleaning out at service intervals to keep in optimum working order. Under normal use the breather collects crankcase compression with oil mist and returns the oil to the sump. Whilst operating, due to heat and rapid cooling - condensation forms inside the separator and emulsifies the oil. This then turns into sludge which blocks the exit and entry pipes. The ability to remove the top and clean out at every service (which only takes an extra 5-10 minutes), the separator will stay in perfect working order. It should be noted that blocked separators can cause major oil leaks, particularly turbo chargers leaking. The oil breather/separator is now fitted with a bracket for fixing with oval holes to allow for the varying positions of the screws.

£195.00 *

In stock

Product no.: M12ENG29

Oil filter as fitted to all Noble M12 2.5 and 3.0 cars, also M400

Recommended Retail Price

£13.31
£11.50 *

In stock

Product no.: M12COO18
Thermostat fitted to the Noble M12 and Noble M400
£32.33 *

In stock

Product no.: M12ELE67

Alternator fitted Noble M12 and M400. This is an exchange item and the price includes a £100.00 [excluding VAT] surcharge which is refundable upon receipt of your old alternator.

£299.95 *

In stock

Product no.: M12ELE02

Spark plug fitted to the Noble M12 and M400.

6 required.

Currently unavailable

Product no.: M600ELE02

Starter Motor fitted to the Noble M12, M400 and M600 6-speed models. This is an exchange module, a surcharge of £50.00+VAT which is included in the above price will be refunded upon receipt of your old unit.

Recommended Retail Price

£337.82
£249.50 *

In stock

Product no.: M12IND10

Turbo Oil Drain Pipe for the Noble M12 and M400 models

Length 330mm, one of 3 pipes on system

See also M12IND05 and M12IND06

£48.94 *

In stock

Product no.: M12IND05

Turbo Oil Drain Pipe for the Noble M12 and M400 models

Length 400mm, one of 3 pipes on system.

See M12IND10 and M12IND06.

£46.64 *

In stock

Product no.: M12IND06

Breather bottle drain hose fitted to the Noble12 and M400.

One of 3 pipes fitted

See also M12IND05 and M12IND10

£48.94 *

In stock

Product no.: M12IND07

Hose for the Crank Case Beather, fitted to the Noble M12 and M400.

 

£37.18 *

In stock

Product no.: EXSTUD900

Mild steel Exhaust Manifold Stud for fitting the exhaust manifolds on the Esprit 907 Series and 910 Series. This stud also fits the Noble M12 all models.

You will need up to 15 when fitting the 907 exhaust manifold, along with copper split nuts and washers, to Esprit NA S1, S2, S3 up to 1986, X180,
Elite, Eclat, Excel Std & HC

You will need 2 studs when fitting the 910 wastegate adaptor, along with copper split nuts and washers.

You will need up to 12 when fitting the exhaust manifold to the Esprit Turbo 1987 onwards, along with copper split nuts and washers.

You will need 12 when fitting the exhaust manifolds on the Noble M12 and a further 10 (5 per turbo).

£2.50 *

In stock

Product no.: M12TUR17

Front Turbo fitted to the Noble M400.

£1,044.00 *

Currently unavailable

Product no.: M12TUR23

Rear Turbo fitted to the Noble M400

£1,044.00 *

Currently unavailable

Product no.: M12INST06

Dual Oil Gauge as fitted to the Noble M400 and can be fitted as an upgrade to the M12. If you have not got this gauge fitted to your car originally and are fitting for the first time, you wil also require: M12ELE71, M12ELE72, M12ELE73 and .M12INST07.

This is a special order part and takes 4-6 weeks - please ring and advise if you would like us to order this part in for you.

£213.21 *

Currently unavailable

Product no.: M12ELE72

Gauge Dual Brass Adaptor required to fit the Dual Oil Gauge - M12INST06. Also see M12ELE71, M12ELE73 and M12INST07.

£43.36 *

In stock

Product no.: M12ELE73

Gauge Dual Adaptor required to fit the Dual Oil Gauge - M12INST06. Also see M12ELE71, M12ELE72 and M12INST07.

£14.22 *

In stock

Product no.: M12ELE71

Gauge Dual Adaptor required to fit the Dual Oil Gauge - M12INST06. Also see M12ELE72, M12ELE73 and M12INST07.

£31.06 *

In stock

Product no.: M12INST07

Gauge Dual line required to fit the Dual Oil Gauge - M12INST06. Also see M12ELE71, M12ELE72 and M12ELE73

Currently unavailable

Product no.: M12ENG77

Crankshaft as fitted to the 3.0 litre engine in the Noble M12 GTO3, M12GTO-3R and M400.

£689.00 *

In stock

Product no.: M12TUR09

Turbo water pipe [metal] front as fitted to the Noble M12, M12 GTO-3, M12 GTO-3R and M400.

£71.14 *

Currently unavailable

Product no.: M12TUR10

Turbo water pipe [metal] rear as fitted to the Noble M12, M12 GTO-3, M12 GTO-3R and M400.

£96.55 *

Currently unavailable

Product no.: M12ENG12

Engine oil dipstick for the Noble M12 fitted with 2.5 litre engine.

£34.66 *

In stock

Product no.: M12ENG25

Engine mounting as fitted to the Noble M12, all models, and M400. These come complete with x2 metal washers and x1 rubber buffer washer. Four required per car.

£60.85 *

In stock

Product no.: M12ELE13

Fuel Gauge as fitted to the Noble M12 2.5, M12 GTO-3, M12 GTO-3R and M400

£64.99 *

Currently unavailable

Product no.: M12EXH39

O Ring-Inlet to Engine M12 3.0 litre engine as fitted to M12 GTO-3 and M12 GTO-3R, M400. Six required per engine.

£10.45 *

In stock

Product no.: M12TUR21

Heatshield fitted to the rear Turbo on the Noble M12 and M400 models.

£23.49 *

In stock

*

Prices exclude VAT and carriage costs

1 - 30 of 38 results